If the ultrasound test fails, the most common cause is occupancy sensors used to control lighting in the classroom. This info can be found on the label on both wireless components. A solid green LED identifies that the wireless USB receiver is receiving power, but it does not indicate a successful wireless pairing. If you are successful re-pairing the Mimio wireless components, the wireless link status LED on the Mimio Xi should turn to solid green. The wireless components from the first generation Mimio wireless are not compatible with the components from the 2nd generation Mimio wireless. You must stick a paperclip in the small hole on the flat face of the box and hold for 1 second.
|Date Added:||1 January 2007|
|File Size:||16.27 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Hold down the raised button on the dongle until the light starts flashing. The latest Mimio wireless has a wireless receiver with a flash drive form factor, while the first generation Mimio wireless used a small black box for a wireless receiver that connected to the computer with a short mini-B USB cable.
The 2-digit revision code on black box must match the 2-digit revision code on the wireless module on the Mimio Xi device. Once the light is flashing, go over to the Mimio Xi device and press the recessed button beneath the power button on the wireless module.
Powering off the plasma display will permit the Mimio device to work correctly. Confirm the mimlo version of Mimio wireless components are being used together, i.
If the infrared test fails, the problem may be caused by a plasma display in use nearby.
Within 30 seconds, depress the recessed button beneath the power LED on the Mimio Xi device for 1 second until you hear a beep. Make sure the dongle is inserted into a USB port on your computer. You must stick a paperclip in dam small hole on the flat face of the box and hold for 1 miimio. If that stylus works, you need to replace the malfunctioning stylus; contact techsupport mimio. If none of the above steps resolves the issue, contact techsupport mimio.
The wireless components from the first generation Mimio wireless are not compatible with the components from the 2nd generation Mimio wireless. First try changing the batteries in your stylus.
Check out our Printable Reference Card.
If the link status LED is flashing or amber, there is no connection with the wireless receiver and it may require re-pairing. When a wireless link is established, this LED will flash when in an idle state; it will turn solid green when a Mimio stylus is in use.
A solid green LED identifies that the wireless USB receiver is receiving power, but it does not indicate a successful wireless pairing. The bottom LED has a pen icon next to it, which is the pen activity indicator. If that seems to be the case, change the orientation of the Mimio device to get it out of direct light.
Contact Us Need help with your products? Posted on August 2, by admin.
Join our Mailing list. Please test for environmental interference using MimioStudio Notebook.
Small black box form factor dongle There is no LED on the black box. The top LED has a radio tower icon next to it—this is the wireless link status indicator, and it should be solid green indicating a wireless link with the receiver.
If the problem persists after using a known working stylus, it may be due to ultrasound interference from an environmental source. Contact our support team. Each has a different form factor for the wireless USB receiver, also referred to as the wireless dongle.
Try turning off the closest lights and test again to see if the interference is eliminated. Click here for more information. Mimio Xi Support Mimio Xi. If this does not resolve the issue, try using a known working stylus from another classroom. The Mimio Xi device will show up in the list and you will now be able to calibrate. If you are successful re-pairing the Mimio wireless components, the wireless link status LED on the Mimio Xi should turn to solid green.
How do you pair Mimio wireless components?
See a visual step-by-step guide on how to set up your product.