Option Description [Enabled] Enables the onboard Floppy controller. Therefore, if the AGP driver of the card does not support the initialization feature, the display may work abnormally or not function after resuming from S3. When set to higher values, every PCI device can conduct transactions for a longer time and thus improve the effective PCI bandwidth. Pull the lever sideways away from the socket. Operation is subject to the following two conditions: Each Serial ATA connector can connect to 1 hard disk device.
|Date Added:||19 April 2009|
|File Size:||31.74 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Meanwhile, there are two functions to protect user’s system from crash. Five buttons are placed on the left column of the screen.
Connect the fan to the power supply kf880 provided on your mainboard. Please refer to the following table for detailed dual-channel DDR. T is a utility that monitors your disk status to predict hard disk failure.
Power LED in light green, speaker in yellow. The items under each BIOS category described in this chapter are under continuous update for better system performance.
Once the password is disabled, the system will boot and you can enter Setup without entering any password. The converter can be purchased from a speaker store. The drivers will be automatically installed. If your family and you are getting on Internet at home with multi computers, and your ISP only provides one IP for you, you may need to enable IP Sharing function in order to use this one IP to get on Internet with multi computers simultaneously.
In case the overclocking fails, you can press “Ins” key while system rebooting to restore to the BIOS defaults. Selecting Continue to boot enables the user to duplicate the array after booting into operating system. Select Disk Drives lets the user select the array drives by their requirements.
You can also enable the Every turn on function, which will enable the deltw program s and file s every time the Digi Cell utility runs. CFAN1 supports the fan control. When the CPU is temporarily suspending or staying in the low load balance, it will restore the default settings instead.
The disk array data capacity is equal to the number of drive members times the capacity of the smallest member. The left windowpane displays the controller and disk drives and the right windowpane displays the details of the controller or disk drives.
Hence, the program screens shows here in this chapter may be slightly different from the latest utility and should be held for reference only. CPU Ratio Selection This setting controls the multiplier that is used to determine the internal clock speed of the processor relative to the external or motherboard clock speed.
It must be identical for all points in the network. Look for the gold arrow.
Connect to the master drive. Ad-hoc Mode An Ad-hoc network is a local area etherneg or other small network, especially one with wireless or temporary plug-in connections, in which some of the network devices are part of the network only for the duration of a communications session. When using Select Disk Drives, the channel column will be activated. When you select Load Fail-Safe Defaults, a message as below appears: This item enables users to select an already-connected etthernet drive to rebuild the broken array.
Selecting [Disabled] will speed up the boot process. Including powerful function with hardware monitor, system alert and instinctive UI of overclocking, CoreCenter is just like your PC doctor that can detect, view and adjust the PC hardware and system status during real time operation.
RAID 0 does not support fault tolerance. Then return to pin position. The system will boot from the selected device. Floppy Disk Drive Connector: The only time when you need to disable it is when you want to update the BIOS.