If I forget and plug my cell into the wrong one, it won’t charge. Most settings such as filter width, AGC constant, etc. Don’t know how to do this No external units or PC required. The most obvious and to me, curious symptom is inability to “calibrate” the IC receive audio codec.
|Date Added:||2 July 2009|
|File Size:||60.77 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Straight type “A” to type “B” cable Any help, suggestions, or words of encouragement will be greatly appreciated! Variable capacitors provide higher accuracy than a typical mechanical relay tuner.
Notes 77410 after each question Fixed for 15kHz in FM mode.
Have you tried a different USB cable? The dot-matrix portion of the LCD shows the following items:. As before, works both ways, when hub is powered and unpowered. This is an issue with the Rig and has nothing to do with HRD. So, let’s look at hardware.
Seems to be from what I can tell. Also, you might want to check your power management settings to be sure the USB Root Hub is not set to allow the computer to power off the device to save power.
Download the latest firmware updates. The IC represents the latest in digital achievement and performance. If I forget and plug my cell into the wrong one, it won’t charge.
Is the hub a powered hub? What I’m not sure of is if the powers the USB interface internally, or if it relies on the cable for it’s internal interface power. Do you have a wall wart supply plugged into it? The internal antenna tuner covers from 1. The IC employs a double conversion superheterodyne system which has an image rejection mixer for the 2nd mixer stage. I ico nothing but trouble until I went to a 3 foot long USB cable, anything longer would not work reliably.
No external units or PC required. Yes, a total of three different ones one brand new Is the hub a powered hub?
Originally posted by n4kit View Post. Don’t know how to do this Icom has many years of DSP expertise, and has been key in development of the technology.
Once you transmit on a frequency, the tuner can instantly retune the frequency using its built-in memory. The optional RS-BA1 allows you to use the IC from another room using your home network or even from a remote location over the Internet. Then in Device Driver: If you are NOT using a power source for the hub, it adds to the overall drain of power, so it becomes more curious.
Even during long hours of heavy-duty cycle operation, the IC provides stable output power. Have you looked to see what the current usage for each port when connected directly?
In fact, thank you to all who have read this thread! Watch which drivers dis appear when you un plug the cable. IRLP shack and local area only. I tried turning off the power management as you suggested but sadly, no joy.